Read the answers to frequently asked ICON questions like: Do I need to service my cart, what is the bolt pattern of my wheel, and more.
Do you need to service your ICON Commercial (Formerly Cruise Car) cart?
Yes. Your cart will need very minimal service, but the small things you do now will prolong the life of your cart.
What can I do to service my cart?
Daily
● Charge batteries fully
Weekly
● Checking tire pressure (15-20 psi)
● Check all lights (headlights, taillights, turn signals)
● Horn Operation
Monthly
● Check and fill battery water levels (serviceable batteries only/distilled water only)
● Clean battery terminals of corrosion and apply anti-corrosive spray/gel
● Tighten battery terminal connections (95-100 in. lbs)
Yearly
● Schedule your yearly service with your ICON dealer for critical fluid changes, grease the
front end and other serviceable fittings, electrical services, overall inspection, tire rotation,
etc.
What size socket do I need to remove my lug nuts?
A 19mm or a 3/4 socket will work to remove your lug nuts.
What is the bolt pattern of my wheel?
The ICON Commercial bolt pattern is a 4X4. 4-bolt patterns are measured in a straight line from center to center of two bolt holes sitting directly across from each other.
What size/thread are my lug studs?
The thread of the lug studs is a standard size. 1/2X20
What is the torque specification for my lug nuts?
Lug Nuts should be torqued to 55-65 FT LBS.
They should also be tightened in proper sequence.
Do all ICON Commercial have the same key?
Yes. All ICON Commercial do come standard with a universal ignition, however there is a unique key option available through your dealer.
Can I lift or lower my cart?
No. Currently there is no way to add a lift or lower the lifted carts at this time. The frame structure of the two carts are different and does not allow for parts to be interchangeable. Putting smaller or larger tires can affect the ride height of the vehicle, but the suspension height will remain unchanged.
My cart is charged, but my gauge doesn’t read 100%.
The first step is to try and reset the cluster. If the reset works but the gauge continues to act
abnormal, please contact your dealer for a replacement unit.
Cluster Reset Procedure
- With the key in the off position, plug your charge cord into the cart and wait till the charge
indicator on the body turns green. - Wait 10 seconds and turn the key to the on position, wait 10 seconds and turn the key off.
- Unplug the cart and turn the key on, at this point the gauge should be reset to 100%.
- If this did not work and/or the gauge continues to act abnormal, contact your dealer for a
replacement gauge cluster.
To download the PDF version of this article, click here.